by: jimmycox
Total views: 1
Word Count: 685

There are two general types of finishes for furniture, classified according to whether they are transparent or opaque. The transparent finishes, designed to bring out the natural beauty of the wood are oil, water, and spirit stains, rubbed oil and wax finishes, shellacs, varnishes, and clear lacquer. The opaque coatings include paint and lacquer enamels. The most vital step in the finishing of furniture is the preparation of the wood surfaces. The wood is the foundation of the finish, and whether the finish is opaque or transparent, what lies under it will affect its character and reflect the degree of skill and care bestowed upon it. In all newly made furniture, whether a copy of an old piece or the latest modern design, the basic treatment is the same. The wood must be smooth and free from rough grain, and all dust carefully wiped off before any finish is applied. The first stage in finishing any piece is the smoothing of the surface, and for this operation steel scrapers, sandpaper, and steel wool may be used. Scraping On certain woods, such as soft pines and cedar, it is sometimes advisable to smooth the surface after planing by scraping. The tool used is a flat piece of steel such as a piece, 5" x 2 1/2 ", cut from a hand saw blade. The edge must be perfectly straight, and filed to a slight bevel, say 30 degrees, and smoothed on an oilstone. Then a cutting edge is formed on it by rubbing a piece of hard steel along the edge so that a burr is formed on one or both edges. The scraper is used by holding it firmly with both hands, bowing it slightly outward in the center and pushing (and sometimes pulling) it along parallel to the grain of the wood. Sanding The best type of sandpaper for fine cabinet work is the garnet paper, and the most useful grits are (in order of increasing coarseness) the 4/0, 3/0, 00, and 1/2. The 6/0, wet-or-dry paper, dipped in water, is often used for smoothing between finish coats. Sandpaper is always applied along the grain in a straight forward and back motion. Working with Steel Wool Pads of steel wool can be used to finish any wood surface, though flecks of metal are apt to become imbedded. It is, however, better reserved for smoothing after the application of filler or the first coating. The coarsest wool used for these purposes is the No. 1; and Nos. 0 and 00 are generally better for fine work. In all cases the steel wool is applied in the direction of the grain. If a coating of any kind has been applied it is necessary to use long, sweeping, light strokes so as not to generate appreciable heat in any one spot. Stains Of the three types of stain available, the oil stain is much the best in the hands of a novice. The water stains raise the grain, and both they and the spirit stains are quite difficult to apply without streaking. The oil stain should be applied with a clean varnish brush, after testing the color on a piece of scrap wood of the kind used in the furniture. If a light finish is required, the stain can be wiped off after a minute or so. The longer it is left, the darker it will become, within limits. If the stain is too dark to begin with, it may be thinned with turpentine. Since end grain absorbs more stain it normally finishes darker. This can be checked by dampening it with clear turpentine before staining. In staining horizontal grains it is usual to begin in the center and work toward the ends. For vertical grain, as in cabinet ends, start at the top and work down. Any recesses or inside angles should be done first, but do not let any part dry before completing the whole surface. Once the furniture has been finished, you can enjoy the work you have created.

About the Author

Discover How To Build Your Own Amazing Furniture With Our Free Furniture Plans! Click Here For Free Online Ebook http://www.freefurnitureplan.net/

---

View PDF | Print View

---

Rating: Not yet rated

--Choose-- 0 1 2 3 4 5

Comments

No comments posted.

Add Comment

You do not have permission to comment. If you log in, you may be able to comment.
Next Article - How To Get Started In The Great Sport Of Fishing
Previous Article - How To Make Your Own Corsage

More Related Articles In This Category

1: Having Fun with Alphabets for Scrapbooking
2: The Best Rated Digital Cameras 2008
3: Getting Started With Scrapbooking Is Easy And Also A Lot Of Fun
4: Here's How To Learn To Hypnotize
5: Guide to Matching a Chess Board to Your Chess Pieces
6: How To Play Sudoku
7: A Do-It-Yourself Guide for Beginners To Study Fake Tan
8: Three Metal Detecting Tips To Help You Hunt Treasure
9: Around The World In Three Tobaccos
10: How To Smoke Premium Cigars: Deciding Where To Start
11: Storing Cigars The Right Way
12: Gift Basket Ideas for Mothers Day
13: Cake Decoration Icing 101 - Make Your Choice
14: Developing Your Digital Camera Photos
15: Neat, Clear Lettering for Your Mechanical Drawings
16: Creating Quality Animation Is Now Within Anyone's Reach
17: Running Multiple Blogs Vs. A Single Money Making Powerhouse
18: Sudoku Tips And Tricks Make Puzzle Solving Fun
19: How to Buy Antiques
20: Knife Sharpening System - For the Knife Hobbyist
21: An Aircraft Buyer's Secret Weapon
22: Photography And Photo Albums
23: Hobby Remote Control Toys Buying Guide
24: 1967 - Slot Cars Go Tech
25: Model Boat Building- The New-Age Hobby!

---

For WebMasters

Link This Article - HTML Code -

<a href="http://americanahost.com/articles/hobbies/make-your-furniture-shine.html" target=_blank>Make Your Furniture Shine</a>

Link This Article - BBcode -

[url=http://americanahost.com/articles/hobbies/make-your-furniture-shine.html]Make Your Furniture Shine[/url]

Copy This HTML Code To Put This Article In Your Web Site.

<h1>Make Your Furniture Shine</h1><br><br> <br><br> There are two general types of finishes for furniture, classified according to whether they are transparent or opaque. The transparent finishes, designed to bring out the natural beauty of the wood are oil, water, and spirit stains, rubbed oil and wax finishes, shellacs, varnishes, and clear lacquer. The opaque coatings include paint and lacquer enamels. The most vital step in the finishing of furniture is the preparation of the wood surfaces. The wood is the foundation of the finish, and whether the finish is opaque or transparent, what lies under it will affect its character and reflect the degree of skill and care bestowed upon it. In all newly made furniture, whether a copy of an old piece or the latest modern design, the basic treatment is the same. The wood must be smooth and free from rough grain, and all dust carefully wiped off before any finish is applied. The first stage in finishing any piece is the smoothing of the surface, and for this operation steel scrapers, sandpaper, and steel wool may be used. Scraping On certain woods, such as soft pines and cedar, it is sometimes advisable to smooth the surface after planing by scraping. The tool used is a flat piece of steel such as a piece, 5" x 2 1/2 ", cut from a hand saw blade. The edge must be perfectly straight, and filed to a slight bevel, say 30 degrees, and smoothed on an oilstone. Then a cutting edge is formed on it by rubbing a piece of hard steel along the edge so that a burr is formed on one or both edges. The scraper is used by holding it firmly with both hands, bowing it slightly outward in the center and pushing (and sometimes pulling) it along parallel to the grain of the wood. Sanding The best type of sandpaper for fine cabinet work is the garnet paper, and the most useful grits are (in order of increasing coarseness) the 4/0, 3/0, 00, and 1/2. The 6/0, wet-or-dry paper, dipped in water, is often used for smoothing between finish coats. Sandpaper is always applied along the grain in a straight forward and back motion. Working with Steel Wool Pads of steel wool can be used to finish any wood surface, though flecks of metal are apt to become imbedded. It is, however, better reserved for smoothing after the application of filler or the first coating. The coarsest wool used for these purposes is the No. 1; and Nos. 0 and 00 are generally better for fine work. In all cases the steel wool is applied in the direction of the grain. If a coating of any kind has been applied it is necessary to use long, sweeping, light strokes so as not to generate appreciable heat in any one spot. Stains Of the three types of stain available, the oil stain is much the best in the hands of a novice. The water stains raise the grain, and both they and the spirit stains are quite difficult to apply without streaking. The oil stain should be applied with a clean varnish brush, after testing the color on a piece of scrap wood of the kind used in the furniture. If a light finish is required, the stain can be wiped off after a minute or so. The longer it is left, the darker it will become, within limits. If the stain is too dark to begin with, it may be thinned with turpentine. Since end grain absorbs more stain it normally finishes darker. This can be checked by dampening it with clear turpentine before staining. In staining horizontal grains it is usual to begin in the center and work toward the ends. For vertical grain, as in cabinet ends, start at the top and work down. Any recesses or inside angles should be done first, but do not let any part dry before completing the whole surface. Once the furniture has been finished, you can enjoy the work you have created.<br><br> <h3>About The Author</h3> Discover How To Build Your Own Amazing Furniture With Our Free Furniture Plans! Click Here For Free Online Ebook http://www.freefurnitureplan.net/<br><br> Keywords: <b>free furniture plan, furniture, furniture plan</b> <br><br>Article Source : <a href="http://americanahost.com/articles"><b>Articles Directory</b></a></br> Article URL : <a href="http://americanahost.com/articles/hobbies/make-your-furniture-shine.html" target=_blank>Make Your Furniture Shine</a></br> Article Category : <a href="http://americanahost.com/articles/hobbies/">Hobbies</a></br> Article Author : <a href="http://americanahost.com/articles/profile/jimmycox-332.html">jimmycox</a>

---

Article URL : Make Your Furniture Shine
Article Category : Hobbies
Article Author : jimmycox